DUET - AUTO FEED CARD CUTTER
The Duet Auto Feed Cutter, has both Pen and Knife for cutting and marking of Card/ Plastics, it will pull Card/ Plastic from a roll clamp and cut automatically from a variety of Softwares.
Being of Flatbed design no movement of the material occurs while cutting also difficult materials (Flexible) can be cut if the vacuum option is requested. Standard cards can be cut up to 0.6mm thick without the use of a vacuum system by automatic clamp bars which hold the card in place while cutting. Due to the Auto Roll Feed pattern lengths are un-limited (up to card roll length) with the precise Roll Feed.
Comes Complete with our “Show-It” Software for ease of driving from most HPGL, DMPL and Gerber files made from CAD Softwares such as AutoCAD and most Textile Softwares.
Technical Specifications
|
Cutting Area
|
1820 x 900 (71.5”)
|
|
Table Size
|
2230 x 1420 (88” x 56”)
|
|
Max Card Size
|
1850mm (73”) x Roll Length
|
General Specifications for Duet - Auto Feed
|
Cutting Thickness
|
Card/ Plastic up to 0.6mm
|
|
Speed
|
56cm/s (40cm/s on axis)
|
|
Tools as Standard
|
Carbide Steel Blade and Pen
|
|
Language
|
HPGL, DMPL and AP300 Gerber
|
|
Electrical Equipment
|
240/115 VAC 50/60HZ – 100 VA Max
|
|
Addressable Resolution
|
0.025mm
|
|
Accuracy
|
0.1% (User Calibration to 0.01% Possible)
|
|
Repeatability
|
0.1mm
|
|
Pen Type
|
Biro, Bic Type, H.P. and Others
|
|
Operating Temp.
|
0 – 40 Degrees (32 -104F)
|
|
Operating Humidity
|
35% - 80% Non Condensing
|
|
Vacuum Pump
|
1000w – 2000w (Not Included
|
QUICK & EASY
Flat-bed design enables materials to be laid on the cutting surface and the material held in place with automatic clamps or a vacuum system. The carbide steel tipped blade glides over the tables surface cutting and closing shapes for clean instant removal.
EFFICIENT
A resilient cutting surface means that ‘protective backing sheets’ to the material are not required.
VERSATILE
A wide range of blade pressure settings provide versatile cutting ability.
COMPACT
Due to the Auto Feed long lengths can be cut on a table far smaller than would be normally required.
COMPATIBILITY
The ‘DUET’ can be directly driven from most software packages and includes our ‘SHOW-IT’ file conversion/control software.
|
